The Shelby Blouse Hack





I am back today with another pretty simple hack for the Shelby pattern. This time I wanted to try out a Shelby blouse. This is a look I have been seeing a lot in ready to wear and thought it would be the perfect match for the Shelby pattern.

To create this hack I only had to make a few simple changes. The first thing that I changed was to lengthen the ties by about 10 inches each so that I could cross them in the back and wrap them around to the front for a bow. I thought it would be a fun was to add a bit more waist definition to the blouse. It almost gives it a peplum look. It would work fine without the wrap around too, I just wanted to give it a try.

The next change I made was obviously to shorten the pattern significantly. To accomplish this I measured down from the lengthen / shorten line by about 6 inches on each seamline. This gives you a bit of a cropped look so if you want an longer blouse just add more inches.

Then I made a line about an inch long that is perpendicular to each side.

Next create a curved cut line to join the two sides.

Make sure you shorten all front and back pieces in the same manner as well as the front facing.

The last thing that I changed was the button placement. I decided this at the very end once it was hemmed and I could visually figure out what would look balanced. I ended up going with 5 buttons / buttonholes that are a bit closer together than the dress or romper simply because it was my personal preference.

And that is it. I sewed up the rest according to the directions for the Shelby dress and it all came together quite smoothly. I love the way it turned out and I think it will look great with high waisted jeans or Landers. You can find the Shelby pattern in my shop here is you would like to give it a try.